SHAKE WELL BEFORE USE 1. Ensure cap is on the bottle. 2. With the back label of the bottle facing you so the chamber is on top left hand side gently tip the bottle to the left allowing liquid into the dosing chamber. Measure 4 or 6 ml as required. To reduce the amounts of liquid in the chamber gently tip the bottle to the right allowing excess to drain back into the bottle. Repeat if required. 3. Stand bottle upright and remove cap. 4. Pour liquid from the dosing chamber into the sprayer and make up to 1 litre with water. Replace cap. 5. Shake sprayer well to mix and use immediately. 6. Spray the whole plant evenly until just before run-off (before drips start to form at the tips of leaves). 7. Rinse sprayer thoroughly after use and dispose of washings safely by pouring onto bare soil. Once the bottle is empty, RINSE CONTAINER THOROUGHLY before disposal by manually rinsing three times. This can be done by filling the dosing chamber with clean water, replacing the cap and tipping the water into the bottle. Repeat steps 1 – 4 above to add washings to sprayer at time of filling and dispose of empty container safely.
Do not use in bright sunlight or when plant roots are dry. Avoid spraying delicate open blooms. This product may stain absorbent surfaces.
Use plant protection products safely. Always read the label and product information before use. Fungus Fighter Conc contains trifloystrobin and tebuconazole.